这篇文章给大家介绍ElasticSearch如何进行角色分离部署，内容非常详细，感兴趣的小伙伴们可以参考借鉴，希望对大家能有所帮助。
成都创新互联-成都网站建设公司，专注成都做网站、网站设计、外贸营销网站建设、网站营销推广，主机域名，网络空间，网站托管运营有关企业网站制作方案、改版、费用等问题，请联系成都创新互联。
ES的架构为三节点，即master、ingest、data角色同时部署在三台服务器上。
下面将进行角色分离部署，并且每个角色分别部署三节点，在实现性能最大化的同时保障高可用。
▷ elasticsearch的master节点：用于调度，采用普通性能服务器来部署
▷ elasticsearch的ingest节点：用于数据预处理，采用性能好的服务器来部署
▷ elasticsearch的data节点：用于数据落地存储，采用存储性能好的服务器来部署
服务器配置
注意：此处的架构是之前的文章《EFK教程 - 快速入门指南》的拓展，因此请先按照《EFK教程 - 快速入门指南》完成部署
1️⃣ 部署3台data节点，加入原集群
2️⃣ 部署3台ingest节点，加入原集群
3️⃣ 将原有的es索引迁移到data节点
4️⃣ 将原有的es节点改造成master节点
之前已完成了基础的elasticsearch架构，现需要新增三台存储节点加入集群，同时关闭master和ingest功能
elasticsearch-data安装：3台均执行相同的安装步骤
tar -zxvf elasticsearch-7.3.2-linux-x86_64.tar.gz mv elasticsearch-7.3.2 /opt/elasticsearch useradd elasticsearch -d /opt/elasticsearch -s /sbin/nologin mkdir -p /opt/logs/elasticsearch chown elasticsearch.elasticsearch /opt/elasticsearch -R chown elasticsearch.elasticsearch /opt/logs/elasticsearch -R # 数据盘需要elasticsearch写权限 chown elasticsearch.elasticsearch /data/SAS -R # 限制一个进程可以拥有的VMA(虚拟内存区域)的数量要超过262144，不然elasticsearch会报max virtual memory areas vm.max_map_count [65535] is too low, increase to at least [262144] echo "vm.max_map_count = 655350" >> /etc/sysctl.conf sysctl -p
elasticsearch-data配置
▷ 192.168.1.51 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.51 # 数据盘位置，如果有多个硬盘位置，用","隔开 path.data: /data/SAS path.logs: /opt/logs/elasticsearch network.host: 192.168.1.51 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" # 关闭master功能 node.master: false # 关闭ingest功能 node.ingest: false # 开启data功能 node.data: true
▷ 192.168.1.52 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.52 # 数据盘位置，如果有多个硬盘位置，用","隔开 path.data: /data/SAS path.logs: /opt/logs/elasticsearch network.host: 192.168.1.52 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" # 关闭master功能 node.master: false # 关闭ingest功能 node.ingest: false # 开启data功能 node.data: true
▷ 192.168.1.53 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.53 # 数据盘位置，如果有多个硬盘位置，用","隔开 path.data: /data/SAS path.logs: /opt/logs/elasticsearch network.host: 192.168.1.53 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" # 关闭master功能 node.master: false # 关闭ingest功能 node.ingest: false # 开启data功能 node.data: true
elasticsearch-data启动
sudo -u elasticsearch /opt/elasticsearch/bin/elasticsearch
elasticsearch集群状态
curl "http://192.168.1.31:9200/_cat/health?v"
elasticsearch-data状态
curl "http://192.168.1.31:9200/_cat/nodes?v"
elasticsearch-data参数说明
status: green # 集群健康状态 node.total: 6 # 有6台机子组成集群 node.data: 6 # 有6个节点的存储 node.role: d # 只拥有data角色 node.role: i # 只拥有ingest角色 node.role: m # 只拥有master角色 node.role: mid # 拥master、ingest、data角色
现需要新增三台ingest节点加入集群，同时关闭master和data功能
elasticsearch-ingest安装：3台es均执行相同的安装步骤
tar -zxvf elasticsearch-7.3.2-linux-x86_64.tar.gz mv elasticsearch-7.3.2 /opt/elasticsearch useradd elasticsearch -d /opt/elasticsearch -s /sbin/nologin mkdir -p /opt/logs/elasticsearch chown elasticsearch.elasticsearch /opt/elasticsearch -R chown elasticsearch.elasticsearch /opt/logs/elasticsearch -R # 限制一个进程可以拥有的VMA(虚拟内存区域)的数量要超过262144，不然elasticsearch会报max virtual memory areas vm.max_map_count [65535] is too low, increase to at least [262144] echo "vm.max_map_count = 655350" >> /etc/sysctl.conf sysctl -p
elasticsearch-ingest配置
▷ 192.168.1.41 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.41 path.logs: /opt/logs/elasticsearch network.host: 192.168.1.41 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" # 关闭master功能 node.master: false # 开启ingest功能 node.ingest: true # 关闭data功能 node.data: false
▷ 192.168.1.42 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.42 path.logs: /opt/logs/elasticsearch network.host: 192.168.1.42 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" # 关闭master功能 node.master: false # 开启ingest功能 node.ingest: true # 关闭data功能 node.data: false
▷ 192.168.1.43 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.43 path.logs: /opt/logs/elasticsearch network.host: 192.168.1.43 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" # 关闭master功能 node.master: false # 开启ingest功能 node.ingest: true # 关闭data功能 node.data: false
elasticsearch-ingest启动
sudo -u elasticsearch /opt/elasticsearch/bin/elasticsearch
elasticsearch集群状态
curl "http://192.168.1.31:9200/_cat/health?v"
elasticsearch-ingest状态
curl "http://192.168.1.31:9200/_cat/nodes?v"
elasticsearch-ingest参数说明
status: green # 集群健康状态 node.total: 9 # 有9台机子组成集群 node.data: 6 # 有6个节点的存储 node.role: d # 只拥有data角色 node.role: i # 只拥有ingest角色 node.role: m # 只拥有master角色 node.role: mid # 拥master、ingest、data角色
首先，将上一篇《EFK教程 - 快速入门指南》中部署的3台es（192.168.1.31、192.168.1.32、192.168.1.33）改成只有master的功能， 因此需要先将这3台上的索引数据迁移到本次所做的data节点中
1️⃣ 索引迁移：一定要做这步，将之前的索引放到data节点上
curl -X PUT "192.168.1.31:9200/*/_settings?pretty" -H 'Content-Type: application/json' -d'
{
"index.routing.allocation.include._ip": "192.168.1.51,192.168.1.52,192.168.1.53"
}'2️⃣ 确认当前索引存储位置：确认所有索引不在192.168.1.31、192.168.1.32、192.168.1.33节点上
curl "http://192.168.1.31:9200/_cat/shards?h=n"
elasticsearch-master配置
注意事项：修改配置，重启进程，需要一台一台执行，要确保第一台成功后，再执行下一台。重启进程的方法：由于上一篇文章《EFK教程 - 快速入门指南》里，是执行命令跑在前台，因此直接ctrl - c退出再启动即可，启动命令如下
sudo -u elasticsearch /opt/elasticsearch/bin/elasticsearch
▷ 192.168.1.31 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.31 path.logs: /opt/logs/elasticsearch network.host: 192.168.1.31 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" #开启master功能 node.master: true #关闭ingest功能 node.ingest: false #关闭data功能 node.data: false
▷ 192.168.1.32 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.32 path.logs: /opt/logs/elasticsearch network.host: 192.168.1.32 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" #开启master功能 node.master: true #关闭ingest功能 node.ingest: false #关闭data功能 node.data: false
▷ 192.168.1.33 /opt/elasticsearch/config/elasticsearch.yml
cluster.name: my-application node.name: 192.168.1.33 path.logs: /opt/logs/elasticsearch network.host: 192.168.1.33 discovery.seed_hosts: ["192.168.1.31","192.168.1.32","192.168.1.33"] cluster.initial_master_nodes: ["192.168.1.31","192.168.1.32","192.168.1.33"] http.cors.enabled: true http.cors.allow-origin: "*" #开启master功能 node.master: true #关闭ingest功能 node.ingest: false #关闭data功能 node.data: false
elasticsearch集群状态
curl "http://192.168.1.31:9200/_cat/health?v"
elasticsearch-master状态
curl "http://192.168.1.31:9200/_cat/nodes?v"
至此，当node.role里所有服务器都不再出现“mid”，则表示一切顺利完成。
关于ElasticSearch如何进行角色分离部署就分享到这里了，希望以上内容可以对大家有一定的帮助，可以学到更多知识。如果觉得文章不错，可以把它分享出去让更多的人看到。
