在前一个BLOG里面说到了怎么计算数据文件的大小，ls –l /8192-1，其实这里的8192是不正确的，只是通用情况下是这样的，下面是MOS给的官方文档，关于每种平台下面的OS块的大小
十年的兴宁网站建设经验，针对设计、前端、开发、售后、文案、推广等六对一服务，响应快，48小时及时工作处理。营销型网站建设的优势是能够根据用户设备显示端的尺寸不同，自动调整兴宁建站的显示方式，使网站能够适用不同显示终端，在浏览器中调整网站的宽度，无论在任何一种浏览器上浏览网站，都能展现优雅布局与设计，从而大程度地提升浏览体验。创新互联从事“兴宁网站设计”,“兴宁网站推广”以来，每个客户项目都认真落实执行。
欢迎大家加入ORACLE超级群：17115662 免费解决各种ORACLE问题,以后BLOG将迁移到http://www.htz.pw
How an Oracle block# is mapped to a file offset (in bytes or OS blocks) (文档 ID 761734.1)
修改时间:2011-2-15
类型:HOWTO
In this Document
Goal
Solution
Generic Platform Formula:
Alternate Platform Specific Formula (i.e. AIX and HP Tru64):
APPLIES TO:
Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 11.1.0.8 - Release: 10.2 to 11.1
Oracle Server - Enterprise Edition - Version: 10.2.0.1 to 11.1.0.8 [Release: 10.2 to 11.1]
Information in this document applies to any platform.
GOAL
This document is about how an Oracle block number is mapped to a file offset (in bytes or OS blocks) for Generic OS platforms and includes an alternate formula for specific OS platforms like AIX and HP Tru64. These are the only 2 platforms where the Volume Manager reserves space for Metadata in the Oracle datafile.
For Oracle 10g and 10gR2 there are only two platforms with logical volume Metadata on raw devices: AIX and HP Tru64.
HP Tru64 is no longer supported on Oracle 11g, so AIX is the only one in 11g.
SOLUTION
Every Oracle file has an Operating System file header block ("BLOCK 0") created and maintained by Oracle, which is the size of a standard Oracle block. If multiple block sizes are being used then V$DATAFILE.BLOCK_SIZE should be queried for the file# in question.
"BLOCK 0" can be know as the "Oracle OS Header Block" or "Database Block# 0".
"BLOCK 1" is the Oracle Header Block that contains generic information for the File.
From the documentation: V$DATAFILE.BLOCK1_OFFSET is the "Offset from the beginning of the file to where the Oracle generic information begins.".
"BLOCK 1" offset = v$datafile.block1_offset
V$DATAFILE.BLOCK1_OFFSET do not make much sense for ASM. The value displayed is UB4MAXVAL (4-byte unsiged int max) for ASM when it cannot be computed.
Generic Platform Formula:
A general formula to locate the byte offset in any platform is:
block1_offset = v$datafile.block1_offset
oracle_block_size = v$datafile.block_size
offset = block1_offset + (oracle_block_number - 1) * oracle_block_size
Another way to calculate this offset is using the platform specific information:
Alternate Platform Specific Formula (i.e. AIX and HP Tru64):
Platform specific formula for a file offset to locate an Oracle block in a RAW Device:
offset = raw_device_block0_offset + (oracle_block_number * oracle_block_size)
AIX:
On AIX raw device, the logical volume metadata uses 4096 bytes. That would be the block0_offset on this platform. On HP Tru64 it is 65536 bytes.
raw_device_block0_offset = 4096
file_system_block0_offset = 0
Example:
Calculate the byte offset using the platform specific formula for block 30 in a RAW Device in AIX
oracle_block_size = 8192 (v$datafile.block_size)
oracle_block_number = 30
AIX raw_device_block0_offset = 4096
offset = 4096 + (30*8192) = 249856
Notes:
The above formulas are given in bytes.
file_system_block#_offset refers to any file systems like veritas, zfs, etc.
raw_device_block0_offset is the byte offset to locate the Oracle "BLOCK 0" in a raw device.
file_system_block0_offset is the byte offset to locate the Oracle "BLOCK 0" in a file system.
Formula To produce an offset in 4096 blocks in a RAW device in AIX:
offset
HP Tru64:
For HP Tru64 use:
raw_device_block0_offset = 65536
file_system_block0_offset = 0
