这篇文章主要讲解了“Linux内核Device Tree怎么创建”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“Linux内核Device Tree怎么创建”吧！
公司主营业务：网站制作、成都网站制作、移动网站开发等业务。帮助企业客户真正实现互联网宣传，提高企业的竞争能力。创新互联建站是一支青春激扬、勤奋敬业、活力青春激扬、勤奋敬业、活力澎湃、和谐高效的团队。公司秉承以“开放、自由、严谨、自律”为核心的企业文化，感谢他们对我们的高要求，感谢他们从不同领域给我们带来的挑战，让我们激情的团队有机会用头脑与智慧不断的给客户带来惊喜。创新互联建站推出台江免费做网站回馈大家。
在Linux内核启动时，内核通过of_platform_populate（）函数，将dts中的device node创建成platform device。为后续和各类驱动的platform driver匹配做准备。
of_platform_populate（）函数在文件drivers/of/platform.c中实现。下面基于RockPI 4A单板的内核代码介绍其调用流程和实现过程。
在Linux内核中，可以使用dump_stack（）函数查看函数的调用流程。
/** * of_platform_populate() - Populate platform_devices from device tree data... #省略部分注释 */int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, struct device *parent){ struct device_node *child; int rc = 0; dump_stack(); ### 打印函数调用的堆栈信息 //1.如果root为NULL，则通过of_find_node_by_path（）查找 root = root ? of_node_get(root) : of_find_node_by_path("/"); if (!root) return -EINVAL; //2.遍历dts中的节点 for_each_child_of_node(root, child) { //3.为每个节点和子节点创建platform device rc = of_platform_bus_create(child, matches, lookup, parent, true); ... } ...}EXPORT_SYMBOL_GPL(of_platform_populate);dump_stack（）堆栈信息如下：
[ 0.311191] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.154-00036-gcef30e88a9f5-dirty #36[ 0.311198] Hardware name: ROCK PI 4A 2 (DT)[ 0.311206] Call trace:[ 0.311220] [] dump_backtrace+0x0/0x220[ 0.311232] [ ] show_stack+0x24/0x30[ 0.311244] [ ] dump_stack+0x98/0xc0[ 0.311258] [ ] of_platform_populate+0x30/0xb8[ 0.311268] [ ] arm64_device_init+0x30/0x4c[ 0.311278] [ ] do_one_initcall+0x18c/0x194[ 0.311290] [ ] kernel_init_freeable+0x228/0x22c[ 0.311301] [ ] kernel_init+0x18/0x100[ 0.311311] [ ] ret_from_fork+0x10/0x20
从堆栈信息中，可以看出：在arm64_device_init()函数中实现了of_platform_populate（）函数的调用。后续介绍kernel_init（）函数，暂时先留个念想。
注：
arm64_device_init()函数在arch/arm64/kernel/setup.c文件中实现。此时，串口驱动尚未加载，串口日志保存在缓冲区中。由于RK3399是多核，在Linux内核启动时，堆栈信息或其它日志有可能会丢失。在系统启动时，可以增加nosmp配置，关闭其他CPU的加载，保证尽可能多的日志输出。在配置文件/boot/extlinux/extlinux.conf最后增加：
label kernel-debug kernel /debug/Image fdt /debug/rk3399-rock-pi-4a.dtb append earlyprintk console=ttyFIQ0,1500000n8 init=/sbin/init root=PARTUUID=b921b045-1d rw rootwait rootfstype=ext4 nosmp
of_platform_populate（）函数主要通过of_platform_bus_create（）函数创建platform device。为了理解其实现过程，通过printk增加了部分调试日志，代码如下：
/** * of_platform_bus_create() - Create a device for a node and its children. * @bus: device node of the bus to instantiate * @matches: match table for bus nodes * @lookup: auxdata table for matching id and platform_data with device nodes * @parent: parent for new device, or NULL for top level. * @strict: require compatible property * * Creates a platform_device for the provided device_node, and optionally * recursively create devices for all the child nodes. */static int of_platform_bus_create(struct device_node *bus, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, struct device *parent, bool strict){ ... printk(KERN_ERR"--- name %s \n",bus->name); //1.判断是否有compatible属性，没有则返回 /* Make sure it has a compatible property */ if (strict && (!of_get_property(bus, "compatible", NULL))) { printk(KERN_ERR"--- %s() - skipping %s, no compatible prop\n", __func__, bus->full_name); return 0; } ... //2.创建platform device dev = of_platform_device_create_pdata(bus, bus_id, platform_data, parent); if (!dev || !of_match_node(matches, bus)) { printk(KERN_ERR"--- no match node\n"); return 0; } //3.遍历子节点。如果存在，则创建platform device for_each_child_of_node(bus, child) { printk(KERN_ERR"--- create child: %s\n", child->full_name); rc = of_platform_bus_create(child, matches, lookup, &dev->dev, strict); if (rc) { of_node_put(child); break; } } of_node_set_flag(bus, OF_POPULATED_BUS); return rc;}更新内核映像后，截取了部分内核启动日志，如下：
[ 0.326151] --- name syscon[ 0.326311] --- create child: /syscon@ff770000/io-domains[ 0.326318] --- name io-domains[ 0.326458] --- no match node[ 0.326466] --- create child: /syscon@ff770000/usb2-phy@e450[ 0.326472] --- name usb2-phy[ 0.326627] --- no match node[ 0.326635] --- create child: /syscon@ff770000/usb2-phy@e460[ 0.326641] --- name usb2-phy[ 0.326791] --- no match node[ 0.326798] --- create child: /syscon@ff770000/phy@f780[ 0.326804] --- name phy[ 0.326958] --- no match node[ 0.326965] --- create child: /syscon@ff770000/mipi-dphy-rx0[ 0.326972] --- name mipi-dphy-rx0[ 0.327113] --- no match node[ 0.327120] --- create child: /syscon@ff770000/pvtm[ 0.327126] --- name pvtm[ 0.327291] --- no match node... ## 省略部分log[ 0.330604] --- name display-subsystem ## drm[ 0.330742] --- no match node...
上述日志中的节点名称bus->name和子节点名称child->full_name可在arch/arm64/boot/dts/rockchip/rk3399.dtsi文件中查到：
grf: syscon@ff770000 { ## syscon对应节点名 compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; reg = <0x0 0xff770000 0x0 0x10000>; #address-cells = <1>; #size-cells = <1>; io_domains: io-domains { compatible = "rockchip,rk3399-io-voltage-domain"; status = "disabled"; }; u2phy0: usb2-phy@e450 { ## usb2-phy@e450对应子节点名 compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>; clocks = <&cru SCLK_USB2PHY0_REF>; clock-names = "phyclk"; #clock-cells = <0>; clock-output-names = "clk_usbphy0_480m"; status = "disabled"; ... } } ... display_subsystem: display-subsystem { ## display-subsystem 对应节点名 compatible = "rockchip,display-subsystem"; ports = <&vopl_out>, <&vopb_out>; clocks = <&cru PLL_VPLL>, <&cru PLL_CPLL>; clock-names = "hdmi-tmds-pll", "default-vop-pll"; devfreq = <&dmc>; status = "disabled"; };在系统启动后，可以在/sys/firmware/devicetree/base路径下查看dts文件节点，在/sys/devices/platform路径下查看platform device。
root@linaro-alip:/sys/firmware/devicetree/base# ls syscon@ff770000/#address-cells compatible mipi-dphy-rx0 phandle pvtm usb2-phy@e450#size-cells io-domains name phy@f780 reg usb2-phy@e460root@linaro-alip:/sys/firmware/devicetree/base# ls display-subsystem/clock-names compatible logo-memory-region phandle routeclocks devfreq name ports statusroot@linaro-alip:/sys/firmware/devicetree/base#
root@linaro-alip:/sys/devices/platform# ls ff770000.syscon/driver_override ff770000.syscon:usb2-phy@e460/ff770000.syscon:io-domains/ modaliasff770000.syscon:mipi-dphy-rx0/ of_node/ff770000.syscon:phy@f780/ power/ff770000.syscon:pvtm/ subsystem/ff770000.syscon:usb2-phy@e450/ ueventroot@linaro-alip:/sys/devices/platform# ls display-subsystem/driver drm modalias power ueventdriver_override graphics of_node subsyste
感谢各位的阅读，以上就是“Linux内核Device Tree怎么创建”的内容了，经过本文的学习后，相信大家对Linux内核Device Tree怎么创建这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是创新互联，小编将为大家推送更多相关知识点的文章，欢迎关注！
