这篇文章主要讲解了“使用RMAN恢复数据库的过程”，文中的讲解内容简单清晰，易于学习与理解，下面请大家跟着小编的思路慢慢深入，一起来研究和学习“使用RMAN恢复数据库的过程”吧！
十年的永德网站建设经验，针对设计、前端、开发、售后、文案、推广等六对一服务，响应快，48小时及时工作处理。网络营销推广的优势是能够根据用户设备显示端的尺寸不同，自动调整永德建站的显示方式，使网站能够适用不同显示终端，在浏览器中调整网站的宽度，无论在任何一种浏览器上浏览网站，都能展现优雅布局与设计，从而大程度地提升浏览体验。创新互联从事“永德网站设计”,“永德网站推广”以来，每个客户项目都认真落实执行。
由于需要搭建一个测试环境，把上周末的一个全备拿出来做恢复，首先备份一下测试库上现有的重要表：
exp banping/bangping@ERPTEST file=f:\20090905.dmp tables=(msgtaskdef,rptcol,rptdata)
然后把全备的备份片文件和控制文件COPY过来：
rcp p5b1:/orabak/ctl_file/c-2400249746-20090828-02 /orabak
rcp p5b1:/orabak/arch/* /orabak
文件属主给Oracle：
p5b2@/orabak#chown oracle.dba *
然后启动数据库到nomount状态，进入Rman环境，restore控制文件：
$ rman target /
RMAN> restore controlfile from '/orabak/ c-2400249746-20090828-02';
启动到mount状态：
RMAN> sql 'alter database mount';
根据测试库的环境重命名数据文件的位置：
run {
allocate channel c1 device type disk;
allocate channel c2 device type disk;
set newname for datafile '/dev/rdb_system' to '/u02/oradata/erpdev2/rdb_system';
set newname for datafile '/dev/rdb_undotbs1' to '/u02/oradata/erpdev2/rdb_undotbs1';
set newname for datafile '/dev/rdb_sysaux' to '/u02/oradata/erpdev2/rdb_sysaux';
set newname for datafile '/dev/rdb_undotbs2' to '/u02/oradata/erpdev2/rdb_undotbs2';
set newname for datafile '/dev/rdb_users' to '/u02/oradata/erpdev2/rdb_users';
set newname for datafile '/dev/rdb_erp' to '/u02/oradata/erpdev2/rdb_erp';
set newname for datafile '/dev/rdb_erp_index' to '/u02/oradata/erpdev2/rdb_erp_index';
set newname for datafile '/dev/rdb_erp_xm' to '/u02/oradata/erpdev2/rdb_erp_xm';
set newname for datafile '/dev/rdb_erp_ht' to '/u02/oradata/erpdev2/rdb_erp_ht';
set newname for datafile '/dev/rdb_erp_wl' to '/u02/oradata/erpdev2/rdb_erp_wl';
set newname for datafile '/dev/rdb_erp_cw' to '/u02/oradata/erpdev2/rdb_erp_cw';
set newname for datafile '/dev/rdb_erp_zj' to '/u02/oradata/erpdev2/rdb_erp_zj';
set newname for datafile '/dev/rdb_erp_sp' to '/u02/oradata/erpdev2/rdb_erp_sp';
set newname for datafile '/dev/rdb_cndwl' to '/u02/oradata/erpdev2/rdb_cndwl';
set newname for datafile '/dev/rdb_xdwl' to '/u02/oradata/erpdev2/rdb_xdwl';
set newname for datafile '/dev/rdb_sysaux2' to '/u02/oradata/erpdev2/rdb_sysaux2';
set newname for datafile '/dev/rdb_erp2' to '/u02/oradata/erpdev2/rdb_erp2';
set newname for datafile '/dev/rdb_erp_ht2' to '/u02/oradata/erpdev2/rdb_erp_ht2';
restore database;
switch datafile all;
}
然后执行recover操作：
RMAN> recover database;
这时数据库报错了：
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u02/oradata/erpdev2/rdb_system'RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/04/2009 14:31:39
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of log thread 2 seq 106090 lowscn 10440022578 found to restore
RMAN-06025: no backup of log thread 2 seq 106089 lowscn 10440021828 found to restore
RMAN-06025: no backup of log thread 2 seq 106088 lowscn 10440020848 found to restore
RMAN-06025: no backup of log thread 2 seq 106087 lowscn 10440018779 found to restore
RMAN-06025: no backup of log thread 2 seq 106086 lowscn 10440007985 found to restore
RMAN-06025: no backup of log thread 2 seq 106085 lowscn 10439981571 found to restore
RMAN-06025: no backup of log thread 2 seq 106084 lowscn 10439980750 found to restore
RMAN-06025: no backup of log thread 1 seq 99356 lowscn 10440022588 found to restore
RMAN-06025: no backup of log thread 1 seq 99355 lowscn 10440021839 found to restore
RMAN-06025: no backup of log thread 1 seq 99354 lowscn 10440020856 found to restore
RMAN-06025: no backup of log thread 1 seq 99353 lowscn 10440018824 found to restore
RMAN-06025: no backup of log thread 1 seq 99352 lowscn 10440008036 found to restore
RMAN-06025: no backup of log thread 1 seq 99351 lowscn 10439981670 found to restore
RMAN-06025: no backup of log thread 1 seq 99350 lowscn 10439980746 found to restore
看来有些备份片不全，于是把全备后的备份片弄过来放到/orabak/arch目录，先注册到控制文件：
RMAN> catalog start with '/orabak/arch';
searching for all files that match the pattern /orabak/arch
List of Files Unknown to the Database
=====================================
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171285_15256_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171311_15258_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171617_15257_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171922_15259_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696172209_15260_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696172385_15261_1Do you really want to catalog the above files (enter YES or NO)? y
cataloging files...
cataloging doneList of Cataloged Files
=======================
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171285_15256_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171311_15258_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171617_15257_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696171922_15259_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696172209_15260_1
File Name: /orabak/arch/CNDERPDB_arch_20090829_696172385_15261_1
重新进行recover操作：
RMAN> recover database;
Starting recover at 07-SEP-09
using channel ORA_DISK_1starting media recovery
archive log thread 1 sequence 99417 is already on disk as file /u02/ora_arch/1_99417_640266118.dbf
unable to find archive log
archive log thread=2 sequence=106154
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/07/2009 08:59:16
RMAN-06054: media recovery requesting unknown log: thread 2 seq 106154 lowscn 10444622603
继续找不到需要的备份片，尝试了几次后发现会一直这样找下去：
unable to find archive log
archive log thread=1 sequence=99470
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/07/2009 09:29:02
RMAN-06054: media recovery requesting unknown log: thread 1 seq 99470 lowscn 10444784948
由于测试用，指定SCN恢复：
RMAN> run {
2> set until scn 10444783788;
3> recover database ;
4> }executing command: SET until clause
Starting recover at 07-SEP-09
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/07/2009 09:38:44
RMAN-06556: datafile 1 must be restored from backup older than scn 10444783788
这个通过list backup of archivelog all找出来的SCN竟然不对，继续把备份片拿回来，执行到刚才说缺失的10444784948号SCN进行恢复：
RMAN> run {
2> set until scn 10444784948;
3> recover database ;
4> }executing command: SET until clause
Starting recover at 07-SEP-09
using channel ORA_DISK_1starting media recovery
archive log thread 2 sequence 106205 is already on disk as file /u02/ora_arch/2_106205_640266118.dbf
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=99470
channel ORA_DISK_1: reading from backup piece /orabak/arch/CNDERPDB_arch_20090830_696257683_15267_1
channel ORA_DISK_1: restored backup piece 1
piece handle=/orabak/arch/CNDERPDB_arch_20090830_696257683_15267_1 tag=TAG20090830T130014
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
archive log filename=/u02/ora_arch/1_99470_640266118.dbf thread=1 sequence=99470
archive log filename=/u02/ora_arch/2_106205_640266118.dbf thread=2 sequence=106205
media recovery complete, elapsed time: 00:00:03
Finished recover at 07-SEP-09
尝试打开后报错：
RMAN> alter database open;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/07/2009 09:57:10
ORA-01589: must use RESETLOGS or NORESETLOGS option for database openRMAN> alter database open resetlogs;
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-19921: maximum number of 64 rows exceededRMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 09/07/2009 09:57:20
ORA-00344: unable to re-create online log '/dev/rdb_redo1_11'
ORA-27040: file create error, unable to create file
IBM AIX RISC System/6000 Error: 13: Permission denied
按照备份的文件，先在测试库建立一系列redo文件：
SQL> alter database rename file '/dev/rdb_redo1_11' to '/u02/oradata/erpdev2/rdb_redo1_1';
Database altered.
建立临时表空间文件，可以删除不必要的：
SQL> select name from v$tempfile;
NAME
--------------------------------------------------------------------------------
/dev/rdb_erp_temp
/dev/rdb_erp_temp2
/dev/rdb_erp_temp3SQL> alter database rename file '/dev/rdb_erp_temp' to '/u02/oradata/erpdev2/rdb_erp_temp';
Database altered.
SQL> select name from v$tempfile;
NAME
--------------------------------------------------------------------------------
/u02/oradata/erpdev2/rdb_erp_temp
/dev/rdb_erp_temp2
/dev/rdb_erp_temp3SQL> alter database tempfile '/dev/rdb_erp_temp2' drop including datafiles;
Database altered.
SQL> alter database tempfile '/dev/rdb_erp_temp3' drop including datafiles;
Database altered.
SQL> select name from v$tempfile;
NAME
--------------------------------------------------------------------------------
/u02/oradata/erpdev2/rdb_erp_temp
由于是不完全恢复，要resetlogs打开：
SQL> alter database open;
alter database open
*
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;Database altered.
查看归档模式：
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /u02/ora_arch/
Oldest online log sequence 0
Next log sequence to archive 1
Current log sequence 1
关闭归档：
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.Total System Global Area 603979776 bytes
Fixed Size 2074704 bytes
Variable Size 318769072 bytes
Database Buffers 276824064 bytes
Redo Buffers 6311936 bytes
Database mounted.
SQL> alter database noarchivelog;Database altered.
SQL> alter database open;
Database altered.
感谢各位的阅读，以上就是“使用RMAN恢复数据库的过程”的内容了，经过本文的学习后，相信大家对使用RMAN恢复数据库的过程这一问题有了更深刻的体会，具体使用情况还需要大家实践验证。这里是创新互联，小编将为大家推送更多相关知识点的文章，欢迎关注！
